Website security tips: 11 tips to protect your website


Website security: At this very moment, countless websites are the target of hacker attacks. Uninstalled updates and ignorance are often to blame. These 11 website security tips are essential to prevent hacker attacks on your website.

Hacker attacks are very unpleasant for those affected and can lead to loss of sales, loss of customer confidence and other unpleasant consequences. You should therefore regularly check your website security for potential security vulnerabilities and rectify them as quickly as possible.

Some vulnerabilities can be rectified quite easily with a few simple steps. There are also certain techniques that you should consider when implementing (programming) your website in order to protect it from hackers in the best possible way.

Website Security Check

Website security is a very complex topic and in general: no system is unhackable!

However, you can make it very difficult for attackers and especially against mass attacks, such as Brute-Force-Attacks, you can protect yourself relatively easily, you just have to go about it.

It is best to close security holes as soon as possible, before someone discovers them and can exploit them maliciously. These tools check a whole range of possible vulnerabilities. Many of them are only recommendations, others should definitely be fixed. However, really critical vulnerabilities are not always detected by such tools, so manual checking is definitely necessary.

In this article, I have put together 11 website security tips for better website security that you should look at together with your website developer and implement if possible.

Possible attack scenarios

There are an almost infinite number of attack scenarios on websites or web servers. In the following, I will briefly discuss the most common scenarios and briefly explain what happens during an attack. In “good” attacks, often a combination of a variety of different ways is tried to hack the system.

SQL Injection (SQLi): Malicious database queries are injected to read data or gain access.

Brute-Force-Attacks: Trial and error is used to try to gain access to a system.

Local File Inclusion (LFI): Malicious source code is executed on the target system and can have various consequences – such as system takeover.

Cross-Site-Scripting (XSS): Execution of malicious JavaScript code in the browser of the website visitor.

Defacement: Infiltrating/altering information on a website, e.g. to spread political propaganda.

DDoS Angriff: The aim is to crash the target system by overloading it.

Take over website/web server and use as bot: Web server becomes part of a botnet to spread malware, for example.

The goals of the attack types can be different: Some are aimed at tapping user data, others try to overload the system and crash it, and others simply want to cause chaos.

Website security: 11 tips to protect your website!

1. Use TLS (SSL) certificate

TLS certificates (also known as SSL – SSL is the older version of the protocol) for websites are responsible for secure communication between client and server and are a very important part of website security. The certificate encrypts all data exchanged between the browser (client) and the website (server). Without this encryption, all passwords or even bank data could be intercepted in plain text by attackers.

Secure (encrypted) connections can be recognized by the lock in front of the domain and the preceding https:// like here:

https:// of the domain
https:// of the domain

In addition, certification authorities (CA) such as GlobalSign confirm the authenticity of a domain or even the entire company. This ensures that it is a real website and not, for example, a phising site or similar. Especially for sites with login you should always make sure that this lock appears in front of the domain.

If your website deals with personal data, you definitely need an TLS certificate. Its use must also be mentioned in the privacy policy in a corresponding paragraph. For more information, please contact your data protection officer.

Most hosters have a free TLS certificate included. Otherwise you can rent it there for a small fee. Alternatively, you can also generate a free certificate from Let’s Encrypt. If you use Plesk to manage your website, you can install the extension for free and use it to protect domains and mail servers.

FunFact: Google is its own certification authority (CA), so they virtually certify themselves. 🤯

* Zertifikat
* Certificate

2. Avoid SQL Injection

An SQL injection is an attack in which foreign SQL code is executed on the server-side system of the server. In this way, the attacker can execute SQL queries on the server and thus modify or read data.

Whhhaaaaattt? Don’t worry, here’s a little example:

SELECT name, place, phone FROM index WHERE ID=4;

“4” was written to the SQL statement by a user input and everything is fine. However, the user can also enter the following into an HTML input or HTML textarea: “4; UPDATE name SET place=’somewhere’ WHERE ID=4”.

Our SQL statement would look like this:

SELECT name, place, phone FROM index WHERE ID=4; UPDATE name SET place='somewhere' WHERE ID=4;

The update command was inserted into the statement. An attacker simply used it to change a record from the database.

In this example, only an unimportant value is changed. However, such attacks can also change passwords and read confidential data from the database. Attackers do not do this manually, of course, but use tools for this purpose. You can also use them to see if your website is vulnerable.

To protect against this, it is essential that you mask all user input before it is executed in the database. How this works depends on the programming language.

3. XSS (CORS) Issue

XSS stands for Cross-Site Scripting and is an attack that executes malicious code in the visitor’s browser. How this happens is quite simple. Here’s an example: In a form on a website, you can write normal text. Let’s assume we have a guestbook where the text is simply displayed on the website. I.e. the user input is loaded 1: 1 into the website. However, if the attacker enters JavaScript tags (e.g. <script>alert('HIHIHAHA H4CK3D! 😈');</script>) with malicious code instead of a text and it is embedded in the website, it will be executed for all users in the browser.

CORS stands for Cross-Origin Resource Sharing and can prevent such attacks. It prohibits (or allows) connections for certain scripts or URLs. Therefore, you should definitely check your CORS configuration on the server.

Since this malicious code enters the server via user input, it is beneficial to check every user input. You can use either a blacklist or a whitelist for this purpose. If you only want to allow a few inputs, you should use the whitelist and check whether the input is on the whitelist. If you have a lot of entries and want to reject only a few, you can write “Forbidden” on the blacklist and reject entries with contents of the blacklist.

This is how it might look in JavaScript for a blacklist:

let userInput = '<script></script>';  // this variable comes from your html input
let blacklist = ['<script>', '<link>'];  // These are the FORBIDDEN words
blacklist.forEach(blacklistEntry => {
	if(userInput.includes(blacklistEntry)) {
		console.log('You used a forbidden word! Stop it!');
		return false;
console.log('Everything is great! Go on!');

And for a whitelist like this:

let userInput = 'edit';  // this variable comes from your html input
let whitelist = ['delete', 'add', 'edit'];  // only these words are ALLOWED
let isValid = false;
for(let i = 0; i < whitelist.length; i++) {
	if(userInput.includes(whitelist[i])) {
		isValid = true;
if(isValid) {
	console.log('Everything is great! Go on!');
} else {
	console.log('You have not used the right word!');

You can find more information about CORS here.

4. Prevent DDOS Attacks

DDOS stands for Distributed Denial of Service and is an attack in which the server is brought to its knees by overload. This happens because a huge computer network (botnets) “spams” the server with connections.

Visualized DDOS Attack
Visualized DDOS Attack, Source:

Fortunately, there are services that cannot completely stop such attacks, but can at least dampen them to a certain point. One provider is Cloudflare, for example. As a rule, however, these services are subject to a fee. Therefore, you should carefully consider whether you need protection against DDOS attacks.

5. Use strong passwords

This website security tip is important for everyone! Not only administrators, but also private individuals should pay attention to secure passwords. This includes upper and lower case letters, numbers, digits and special characters. In my opinion, passwords should be at least 8 characters or longer.

Since you then have a large number of passwords and they are hard to remember, you can make your life easier with a password manager like KeePass.

6. Session Management & Cookie Handling

Logins require sessions to know which user is logged in and what actions they are allowed to perform. A unique session ID is stored to uniquely identify a user. In the past, these were often appended to the URL. For example, it looks like this:$

However, if you send this link to show friends this page, they are logged in directly. The session ID was sent with the link and the server thinks that it is the same user. If you send such a link to a close friend it is often not tragic. But imagine you share this link in a social network… 💥

Therefore, many years ago, it was decided to find a better solution. That’s why links should look like this today:

Here the session ID is not included in the URL, but stored in a cookie that is only stored in the user’s temporary memory. Others who call the link have no possibility (this way) to take over his session.

Here you can take a look at how to implement a secure login system with Node.js.

7. Hide public (sensitive) information

There is information that does not belong in the public domain. For websites, for example, this is the PHP version, the absolute file path of the website (e.g. /var/www/html/webroot/site1990/new/stage/) or the server operating system.

To illustrate this, I have a frightening example here. With Google I have the possibility to search not only for specific keywords, but also with parameters e.g. file extensions and citations. So with this search I can display pages that have a publicly accessible phpinfo file. In this file the complete PHP configuration of a server is disclosed and we get a lot of interesting information about the server.

I typed “ext:php intitle:phpinfo” into Google search and get a few results. One result gave me this page:

Public phpinfo.php of a page
Public phpinfo.php of a page

Among them are hundreds of lines with all PHP settings. This is fatal, because this server is still running PHP version 4.4.2. Support and further development of this PHP version has already been discontinued since 2008 and contains serious security vulnerabilities.


You should therefore delete these sensitive files after use or protect them with a password (e.g. via an .htaccess file).

You should also make sure that the display_errors variable is set to Off on live systems. This is because attackers also receive information about the internal file system there. It is even worse with database errors. Here, in the worst case, even the access data is output. Of course, this should be prevented at all costs! In your PHP settings you can instead specify that error messages should be written to a log file.

With an Apache web server you can change the line in your php.ini to Off:

display_errors = Off

If you do not have access to this file, you can insert the following line at the beginning of the file in individual PHP scripts. It is important that this command is executed before the first output:

ini_set('display_errors', 0);

This disables all error messages for the time being. From time to time, however, you need an output to debug a script. In this case it is a good idea to output the output only for your own IP. Under PHP it works like this:

  print_r("your debug output");

8. Validate user input

The topic of validation is a large one and is interesting and even essential for developers – especially in the topic website security. Validation is about checking and validating the data sent from the client to the server according to certain rules. Invalid input is rejected in the process, as it may also contain malicious code. This step is also important against XSS attacks.

Especially when data is written to a database, validation is even more important. This way, even server commands can be executed. In the worst case, even data can be deleted or the server can be shut down. We have already covered this in 2. Avoid SQL Injection.

To make it clear what I mean by validation, here is an example in PHP:

$id = $_GET["id"];
$type = $_GET["type"];

// if id is not a number
if(!is_numeric($id)) {
    exit("id not valid");

// type must be one of the following strings
$types = array("slow", "slower", "normal", "fast", "faster");
if(!in_array($type, $types)) {
    exit("invalid type");

// Parameters successfully validated
// Code goes here


Here the parameters id and type are passed as GET parameters. The script is aborted if id is not a number or type is not in the $types whitelist. The script is then terminated with exit(). If the conditions do not apply, the rest of the code can be executed.

9. Install updates regularly

Many websites are based on a CMS (Content Management System), such as WordPress, Drupal or Joomla. To ensure security, there are regular updates. Again and again new security holes are found and closed by the developers as soon as possible. For this reason, your CMS installation should always be up to date. With most CMS you can set email notifications to be informed about new updates. You should take advantage of this and manually check your pages for updates at regular intervals.

With the tool WPHackedHelp you can check your WordPress site for security vulnerabilities.

The same applies to the installed WordPress plugins. As soon as stable updates are available, you should install them.

Also, your host system (server system) should always be up to date. It is not a big deal if you still have Ubuntu 18.04 instead of the latest Ubuntu 20.04. The important thing is that you use a version that still gets active security updates. On the manufacturer’s pages you can usually find overviews, in which details of individual releases are listed. If you read the abbreviation LTS (Long Term Support), everything is usually good. This means that your version is supported longer, i.e. it is provided with current updates longer than other versions.

Before you update your website and plugins to the latest version, you should create a backup in case something goes wrong during the update and you need to restore the original version.

10. Create Regular backups

Regular backups indirectly contribute to the security of your website. If you find out today that your website has been compromised, you can easily revert to an old state and close the security holes.

Many hosters offer regular snapshots for free or for an additional charge. If you manage your hosting through Plesk, you can use the backup manager or directly create a shell script that backs up directories like /var/www/vhosts to an external backup storage. Your hoster will surely help you choose the right backup solution.

External backups are backups that are saved on a completely different system. In the best case, they are even in another data center. Because as we have seen in the past, even a data center is not safe from external influences.

11. Prevent Spam in Contact Form

Many (well-known) websites have a big problem with bots that leave spam in all kinds of forms on the website. This can be very annoying.

To protect yourself against this, you can easily install the Google reCAPTCHA or if you use WordPress, I can recommend the plugin Antispam Bee. Just install and set up, done.


Whew! That was quite a few steps to improve your website security. Which security aspects are implemented on your website and which ones are you catching up on? Or maybe you have some more steps to protect yourself from attacks?

Related Posts
Join the Conversation


Your email address will not be published. Required fields are marked *

bold italic underline strikeThrough
insertOrderedList insertUnorderedList outdent indent
createLink unlink

This can also interest you